Steps in our Process
Printed concrete provides itself preferably to renewal some years after its preliminary setup. This is done through the application of sealant items.
Using a concrete sealant when carrying out a brand-new imprinted concrete setup is important. Concrete sealant for surface areas on outside applications need to be acrylic to enable wetness in the piece to get away. Where outside usage is worried, solvent-based acrylic sealants usually carry out much better than water-based items.
Acrylic sealants can quickly be fixed if problems end up being present after sealing. Reapplication of an acrylic concrete sealant will basically melt the existing sealant and mix the brand-new addition with the older existing layer. This removes the problem of develop on the surface area, an issue that prevails with water-based sealants.
Water Based Sealer
Concrete is susceptible to chemical attacks and staining since the surface area of concrete is permeable. Liquids and acidic products can leak into the surface area of concrete and jeopardize the stability of the setup. Sealants are used to concrete surface areas to keep them from too soon weakening. An effectively used concrete sealant will make the surface area of concrete non-porous and extend its life for a lot longer than it would without the security.
Typically, imprinted concrete setups do not need additional slip resistance. Nevertheless if your setup is near a swimming pool location, an action, laying on a slope or any other location where additional grip is needed, slip resistance can be increased. This is accomplished by the addition of graded, transparent, micronised white powder particles to the sealant prior to application.